Floor coatings in Marietta, Georgia
From the historic homes around Marietta Square to the newer subdivisions off Sandy Plains and East Cobb, we cover the full spread of Marietta housing stock.
Coating concrete in Marietta
ABC Elite Coatings installs one-day polyurea-polyaspartic floor systems throughout Marietta and the rest of Cobb County. Garages, basements, patios, pool decks, and commercial slabs — all with the same diamond-ground prep and the same written pricing.
Marietta housing stock, and what that means for your slab
Marietta spans a wider range of build eras than anywhere else we work. East Cobb is dominated by ranches and splits from the 1960s through the 1980s, while the blocks around the Square mix genuinely historic homes with recent infill. Slabs from the 70s and 80s commonly show surface pitting, spalled control joints, and an old sealer that has to be ground off before anything new can bond.
A lot of East Cobb homes built in the 70s and 80s have garage slabs with surface pitting and control-joint spalling. That is normal for slabs of that age and it is repairable — it just has to be addressed before coating, not after.
Worth knowing before you get quotes in Marietta
Detached garages near the Square were sometimes poured thin and without much reinforcement. We check thickness before specifying a heavy-build system, because there is no point putting an industrial floor on a slab that cannot carry it.
This is why the estimate happens on site rather than over the phone. We look at the actual concrete, moisture-test it where the situation calls for it, and price any repair into the quote so nothing turns up as a surprise on install day.
Commercial work in and around Marietta
On the commercial side we work the auto shops along Cobb Parkway, small warehouse and flex space, and restaurants around the Square — the last of which almost always means urethane cement rather than epoxy, because of steam cleaning and thermal shock in the kitchen.
Commercial installs are scheduled around your operation — nights, weekends, or phased section by section — so you are never closed for a floor. See commercial flooring.
Neighborhoods and areas we cover
We regularly work in and around Marietta Square, East Cobb, Kennworth, Sandy Plains, Whitlock Heights, plus the surrounding subdivisions. Marietta ZIP codes we serve include 30060, 30062, 30064, 30066, 30067, 30068.
Services available in Marietta
- Garage Floor Coatings — garage floors across Marietta and Cobb County
- Basement Floor Coatings — basements across Marietta and Cobb County
- Patio & Pool Deck Coatings — patios & pool decks across Marietta and Cobb County
- Commercial & Industrial Flooring — commercial across Marietta and Cobb County
- Concrete Repair & Resurfacing — concrete repair across Marietta and Cobb County
Scheduling in Marietta
Marietta sits inside our standard service radius, so there is no travel surcharge and we are usually out this way weekly. Most residential jobs are scheduled within one to two weeks of the estimate, and the install itself is a single day. Call (770) 608-3114 or request an estimate and we will get you on the calendar.
How your Marietta install runs
Same process on every job, whether it is a single-car garage or a warehouse floor.
- 01
Free On-Site Estimate
We come out, measure the slab, moisture-test it, and look at what is actually going on with the concrete. You get a written, itemized price on the spot. No pressure, no "today only" pricing.
- 02
Diamond Grinding & Repair
Every square foot gets mechanically ground to a CSP-2/3 profile with dust-collected diamond equipment. Cracks are cut and filled, spalls rebuilt, and any failed coating comes off. We never acid etch.
- 03
Basecoat & Flake Broadcast
Pigmented polyurea basecoat goes down and vinyl flake is broadcast to refusal while it is wet. Once it sets, we scrape and vacuum the surface back to a smooth, even plane.
- 04
Polyaspartic Topcoat
Two clear polyaspartic topcoats lock everything in, with grip additive dialed to how you use the space. Walk on it that evening. Park on it the next day.
Marietta floor coatings: common questions
How long does the whole job take?
Most residential garages, basements, and patios are start-to-finish in one day. Our crew is typically on site 6 to 8 hours. Larger or heavily damaged slabs occasionally need a second day, and if that is the case we tell you at the estimate, not partway through.
What does a floor coating cost?
Price comes down to square footage, slab condition, and which system you pick. A standard two-car garage in good shape sits in a fairly predictable range; a spalled basement needing moisture mitigation costs more. We give you a written, itemized number on site before any work is scheduled, and that number does not change.
Will hot tires peel it up like my old epoxy?
No. Hot-tire pickup happens when a coating is too rigid and is not mechanically bonded to the slab. We diamond grind to open the concrete profile and use a flexible polyurea basecoat, so the coating moves with the slab instead of fighting it. Hot-tire delamination is covered under the warranty.
What about the cracks in my concrete?
Cracks get chased out with a crack chaser, vacuumed clean, and filled with a structural polyurea that cures harder than the surrounding concrete. Spalled edges and control joints are rebuilt to grade. Fair warning: if a slab is actively moving, a coating will not stop that, and we will tell you straight if that is what we are looking at.
What does the warranty actually cover?
Residential flake systems carry a lifetime warranty against peeling, delamination, and hot-tire pickup for as long as you own the home. It covers our workmanship and the coating itself. It does not cover damage from impact, abuse, or slab movement from foundation issues. You get the full written terms with your estimate — read them.
Ready to book your Marietta estimate?
Free, on site, and written down before anything is scheduled. Serving Marietta and all of Cobb County.
No pressure, no high-pressure "today only" pricing, no obligation.