Paulding County

Floor coatings in Hiram, Georgia

Hiram sits on our Paulding route alongside Dallas, so we are usually out this way weekly.

Coating concrete in Hiram

ABC Elite Coatings installs one-day polyurea-polyaspartic floor systems throughout Hiram and the rest of Paulding County. Garages, basements, patios, pool decks, and commercial slabs — all with the same diamond-ground prep and the same written pricing.

Hiram housing stock, and what that means for your slab

A large share of Hiram was built during the 2003-to-2008 boom. Slabs from that stretch are structurally fine but were frequently poured on tight schedules, and the most common thing we find is pronounced cracking at the control joints.

A good number of Hiram homes were built during the mid-2000s boom. Slabs from that era are typically sound but often have pronounced control-joint cracking that needs filling first.

Worth knowing before you get quotes in Hiram

Expect more crack chasing and filling on a Hiram home than on a comparable Kennesaw one. It is routine work and it is priced into the estimate — but a quote that does not mention crack repair here probably has not accounted for it.

This is why the estimate happens on site rather than over the phone. We look at the actual concrete, moisture-test it where the situation calls for it, and price any repair into the quote so nothing turns up as a surprise on install day.

Commercial work in and around Hiram

Commercially it is the retail corridor along Bill Carruth Parkway and Highway 92.

Commercial installs are scheduled around your operation — nights, weekends, or phased section by section — so you are never closed for a floor. See commercial flooring.

Neighborhoods and areas we cover

We regularly work in and around Hiram Town Center, Bill Carruth Parkway, Silver Comet Trail, plus the surrounding subdivisions. Hiram ZIP codes we serve include 30141.

Services available in Hiram

Scheduling in Hiram

Hiram sits inside our standard service radius, so there is no travel surcharge and we are usually out this way weekly. Most residential jobs are scheduled within one to two weeks of the estimate, and the install itself is a single day. Call (770) 608-3114 or request an estimate and we will get you on the calendar.

Our Process

How your Hiram install runs

Same process on every job, whether it is a single-car garage or a warehouse floor.

  1. 01

    Free On-Site Estimate

    We come out, measure the slab, moisture-test it, and look at what is actually going on with the concrete. You get a written, itemized price on the spot. No pressure, no "today only" pricing.

  2. 02

    Diamond Grinding & Repair

    Every square foot gets mechanically ground to a CSP-2/3 profile with dust-collected diamond equipment. Cracks are cut and filled, spalls rebuilt, and any failed coating comes off. We never acid etch.

  3. 03

    Basecoat & Flake Broadcast

    Pigmented polyurea basecoat goes down and vinyl flake is broadcast to refusal while it is wet. Once it sets, we scrape and vacuum the surface back to a smooth, even plane.

  4. 04

    Polyaspartic Topcoat

    Two clear polyaspartic topcoats lock everything in, with grip additive dialed to how you use the space. Walk on it that evening. Park on it the next day.

FAQ

Hiram floor coatings: common questions

How long does the whole job take?

Most residential garages, basements, and patios are start-to-finish in one day. Our crew is typically on site 6 to 8 hours. Larger or heavily damaged slabs occasionally need a second day, and if that is the case we tell you at the estimate, not partway through.

What does a floor coating cost?

Price comes down to square footage, slab condition, and which system you pick. A standard two-car garage in good shape sits in a fairly predictable range; a spalled basement needing moisture mitigation costs more. We give you a written, itemized number on site before any work is scheduled, and that number does not change.

Will hot tires peel it up like my old epoxy?

No. Hot-tire pickup happens when a coating is too rigid and is not mechanically bonded to the slab. We diamond grind to open the concrete profile and use a flexible polyurea basecoat, so the coating moves with the slab instead of fighting it. Hot-tire delamination is covered under the warranty.

What about the cracks in my concrete?

Cracks get chased out with a crack chaser, vacuumed clean, and filled with a structural polyurea that cures harder than the surrounding concrete. Spalled edges and control joints are rebuilt to grade. Fair warning: if a slab is actively moving, a coating will not stop that, and we will tell you straight if that is what we are looking at.

What does the warranty actually cover?

Residential flake systems carry a lifetime warranty against peeling, delamination, and hot-tire pickup for as long as you own the home. It covers our workmanship and the coating itself. It does not cover damage from impact, abuse, or slab movement from foundation issues. You get the full written terms with your estimate — read them.

Ready to book your Hiram estimate?

Free, on site, and written down before anything is scheduled. Serving Hiram and all of Paulding County.

Call (770) 608-3114 Request a Free Estimate

No pressure, no high-pressure "today only" pricing, no obligation.

Call Now Text Us Free Quote